fonebitzltd

replaced headphone jack with new one. NOW the sound is squeaky , I have replaced the metal strips and tapes to hold the...

Hi guys I have here a customers phone, whereby he said he has supposedly dropped the device. Now the issue is, his iPhone...

Hi there guys I have here an iPhone 5S that does something rather strange. I have recently refurbed the whole phone with...

Hi guys I have a customers iPhone 6 here, where we had done the screen on the phone. We ran function tests on the phone,...

Hi there guys I have here an iPhone 4S where a screen repair has been done. The customers LCD was not working previous to...

I have an iPhone 6 here that has been wet, I have stripped it down and cleaned it with Isopropyl alcohol and now the phone...

We have here an iPad 2 that a customer bought in. It powers up with the regular Apple Logo, and flashes the restore...

So I have recently had a standard iPhone 5 in for repair, just the standard battery replacement like countless others,...

Hi everyone Constantly customer shave been coming in with thei water damaged iPhone 6's, only a few after repair have been...

In "about" do you have an IMEI number?

No, all camera units are different. Each flex is individual to its model

Issue was it just need to be restored through DFU Mode

Settings > Wallpaper > Choose New Wallpaper

If neither of those have fixed the issue, you need to replace the connecting flex that connects the Ear Piece Speaker to the main board, follow this guide and see if it works for you Best of Luck Regards

If you attempt to restore it, the Touch iD fault might cause the phone to brick and bring up the Touch iD Failure error. My advise, open the phone again, make sure the connection for the Home Button is connected correctly, also check carefully that all the pins are somewhat straight and not bent. Next is to check the flex cable that connects the Home Button to the main board, make sure this is not damaged in any area (not ripped or torn). Did you replace the Touch iD / Home Button while replacing the screen?

Hi Ted You will need to follow the disassembly guide, once you have the iPhone motherboard removed, you will need to remove the Heat / Metal shields and clean underneath them, general I use 99% IPA, or Distilled water in a Sonic Bath, they work well. You may need a battery that has charge in it to test it after you complete this process, but cleaning it is very important. Unless you replace the whole motherboard with a new battery and display Best of luck Regards

There is one on the main board and one on the headphone jack piece

Does your iPhone have an IMEI number? Check to see if it is blacklisted also

You may have recieved an iPhone 5S battery rather than an iPhone 5C, the connectors are extremely similar but they are different. Purchase a battery from iFixit that way you know it is the correct battery, the only difference is the capacity of the battery iPhone 5C = 1510 mAh iPhone 5S = 1560 mAh Best of luck Regards