Also it is much easier getting the fan correctly aligned on the stand of rubbery bit if you have the screw removed.
There is a grove in the casing that might be difficult to align. If so use gravity to allow the power unit to fall into "place".
I used two 2.5 mm drill bits, turned upside down. They worked like a dream. It took me a little while to realize that they needed to be lifted slightly from the underlying case in order for the board to slide out.
Quando isso acontecer, você poderá ver um gráfico da reputação que ele adquiriu ao longo do tempo.
Aqui está uma prévia de como será o gráfico:
Nenhuma reputação adquirida ainda.