If your pressure contact pops out you might find the video at http://www.hightechdad.com/2013/05/07/ho... helpful
The spudger is very handy at this point.
You can pull the board out about 1cm with the wires intact.
I found the same as Jeff.
The 3rd screw needed a T5, for me.
Quando isso acontecer, você poderá ver um gráfico da reputação que ele adquiriu ao longo do tempo.
Aqui está uma prévia de como será o gráfico:
Nenhuma reputação adquirida ainda.
If your pressure contact pops out you might find the video at http://www.hightechdad.com/2013/05/07/ho... helpful
The spudger is very handy at this point.
You can pull the board out about 1cm with the wires intact.
I found the same as Jeff.
The 3rd screw needed a T5, for me.