Upgraded 800Ghz G4 to a Dual 1Ghz G4 Processor with Kernal Panic?I removed the 800Ghz G4 Processor then Replaced upgraded to Dual 1Ghz G4 Processor. The system started with the Apple...
Resposta para "Upgraded 800Ghz G4 to a Dual 1Ghz G4 Processor with Kernal Panic?"Well I need to get the grease and re apply it and What do I do if it is just giving me the white buttons? Nothing? I had another Mac do this to me too I dunno what to do at this point Instead of putting the old processor back Do you in fact know if there is a problem with switching out a single processor to a DUo processor type configuration The OSX was expecting the setup from the last restart But I pushed the button inside the thing Unplugged and many 30sec pauses Holding the button Even waiting a few days Not powering this thing up again until I heard from you and had the grease on the CPU or tried replacing the other CPU to see if that was the issue I really need the dual processor to work I didn't leave the unit on very long when I tested it As soon as the kernel panic happens I shut down but then I get that white button upon trying to start up again What next? Do I need clean harddrive in there? No OSX How do I get it to respond to CDRom install? If I just get white button and then nothing ?
Resposta para "Upgraded 800Ghz G4 to a Dual 1Ghz G4 Processor with Kernal Panic?"no I did not.....is that needed? I didn't see any grease on either processor...but I would like to follow your process as I have heard that too on other system builds.......I didn't see it on this one. I can find it at Fry's I am sure.... but can you please please tell me how to wipe it out and restore... if the computer is not responsive....I mean I should have placed the CD in the Drive when I had the APPLE showing before the KERNAL PANIC..... Now all I get is White Button and FAN noise....... So I am unsure how to get back to the process of making the computer first OPEN The CD DOOR so I can PUT a CD INTO IT.....and then allowing it.... The keyboard seems unresponsive....so does the mouse.... Before it was in the programmers setting at Kernal Panic but Frozen.... So I shut down by pressing the power button. Now when I repress the inside button for 30 secs........after unplug ofcourse.... I was going to try to RESET PRAM by holding the keys PRAM but again....I was not getting any response just the system...