Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Parece que seu carrinho de compras está vazio
The iOpener was a good idea but it just didn’t work. I used the heat gun on low and got it off in about 7 min. 30 min to clean off the excess adhesive. The directions stopped at removing the battery. What the !&&*??? is there a trick to plugging in the battery. Mentioning the need to seat the loudspeaker assembly and the NFC antenna - charging coil would have been helpful. Also, directions on seating the adhesive for the battery. Finally, directions on placing the seal would have been good. I ham handedly got it but needed to use the added adhesive that was sent with the kit. Overall took about an hour. I’m kinda psycho over making sure all the old adhesive was removed. Used the heat gun to reseat backing. worked great! Need to revamp the directions with items above but the kit had everything (except heat gum) and things I didn’t need.(likely to cover other installs.) Worried about breaking glass back but no problem. Thanks for the kit.
Quando isso acontecer, você poderá ver um gráfico da reputação que ele adquiriu ao longo do tempo.
Aqui está uma prévia de como será o gráfico:
Nenhuma reputação adquirida ainda.