everything you just said. Wish all modern phones were this easy
UPDATE: So, I was able to peel off the re-apply the old adhesive. It seems pretty secure, but we’ll see. Otherwise, this step needs an additional detail about what type of adhesive would be ideal to finish this.
My digitizer separated from the lcd screen during this step. Wasn’t a problem. Just something to be aware of
Used a heat gun at 3/4 power for TWO 2-min bursts. The remainder of the sides each took a single 2-min burst.
My screws came out fine. But they are easily stripped with too much pressure on reassmbly
only thing missing. I am scraping the old adhesive off and trying to re-use
spudger technique is perfect.
Quando isso acontecer, você poderá ver um gráfico da reputação que ele adquiriu ao longo do tempo.
Aqui está uma prévia de como será o gráfico:
Nenhuma reputação adquirida ainda.