Mine was a GoFlex Desk enclosure. I used the iFixit Essential Electronics Toolkit. I used the iFixit Opening Tool, Spudger and the Jimmy to work my way around the case. The rubber tabs on the side of my case were over the screws. Pry them off, remove the screws and remove the old drive. There were no wires to deal with. Insert the new drive, install the screws and push the rubber tabs back on. One tab hung up when trying to put the drive back into the enclosure. The trick is to push it in evenly so no one tab gets pinched.
Easily got the CD out, now if I knew what broke! I get a
“USB Accessories Disabled
Unplug the accessory using too much power to re-enable USB devices.
Quando isso acontecer, você poderá ver um gráfico da reputação que ele adquiriu ao longo do tempo.
Aqui está uma prévia de como será o gráfico:
Nenhuma reputação adquirida ainda.