Why is it happening? MBP struggle to power up, no cold joints or crackHi guys i need a bit of advice about what's going on here. i have a macbook pro 17 mid 2009 which struggle to power up,...
Resposta para "Boots to grey screen, ejects install cd and goes to missing drive icon"Hello, if its ejecting your cd it means the powerbook can’t read it. You can try with another DVD , or via usb (this Is only doable via the OpenFw) regards
Resposta para "I need to replace this board but have no info on it"The board comes with the trackpad, it’s the controller of the force touch, you see those two flats are soldered. It’s a mess to desolder, they melt too quickly, i tried is a nightmare.. Can you not just unglue the middle bit of battery cells and take out the trackpad? Emil
Resposta para "Speaker replacement made sound even worse!"I thought to give my contribution to this post, because I had to replace the right speaker. Went thru 6 different suppliers because of different faults (either weak tweeter to blown woofer) all of them provided to me with glue residue , either on the frame or on the connector itself, also analysing the pictures on amazon they all have old glue. Came to the conclusion that none of this speakers are brand new but just pulls from top cases, and altho yes the aluminium acts partly for resonance (like a transducer on a wood board) and transfer the lower frequencies , most of these woofers are mechanically flawed because if you send a low volume sine wave it should slowly oscillate not cracking straight away.. I suppose the demand of new speakers (due to the blowing issue) is higher than supply , then from mainstream channels you get all the pulled one. I’ve used different strength of double adhesive cutting it to shape, it doesn’t matter they are all broken. If air escapes from the lower part (the most crucial...