Resposta para "What GPU's are compatible with iMac 27" 2011?"I’ve also found this forum thread to be incredibly helpful in determining the appropriate ROMs, MXM Cards, etc. (1) http://forum.netkas.org/index.php?topic=...
Resposta para "BGA Rework Station for IC"If you’re looking to spend money on a machine to assist with BGA Rework on iPhones I would suggest taking a look at a CNC Mill as it will cut out the chip you need to replace along with any underfill that was present. Obviously, you lose the chip, but if it’s a situation where Touch IC or Audio IC need to be replaced then it can be more reliable than heat. Additionally, the more dense components before especially with the designs Apple has been using recently the more likely there are to be issues with overflow heating where while heating the board to resolve one specific issue you actually introduce a problem in a nearby component.
Resposta para "The htc 10 doesn't have a way to open the phone"@jayeff I think that OP was referring to heating a bag of rice to use an an improvised iOpener. I know I'm necro-ing this question, but since I stumbled on it because iFixit SEO is so good I thought that a link to a disassembly might be helpful for anyone else that might run across it as well :: - https://www.fixez.com/guides/htc/htc-10-repair-guides/htc-10-screen-repair-teardown-and-reassemble