I'm a student who just wants to make the repair community better.
Audio/video nerd, moviemaker, photo guy dude. Action video is cool. I film sports. I make stuff with my hands.
This entire bio is a mess.
Desmontagens nas quais trabalhei
Guides I've Helped Translate
Guias concluídos
Minhas Histórias
Perguntas
-
Headphone amp is not working?I have this Mac as my daily driver, and I regularly use the headphone jack. About a month ago there was crackling in the head...
Respostas
-
Responder a: Phone not turning on after droppedHave you checked the battery connection inside of the device to see if it has come loose?
-
Responder a: Blurred vision from viewfinderIs the diopter set correctly? On the lower right corner of the viewfinder, if you take the eyecup off, there should be a small dial. Turn it until the focus points are in proper focus.
-
Responder a: Computer lagging, only if I touch the trackpadIt could be a bad case of resource allocation. Go to the task manager by using the keyboard, then leave the computer to sit for 10 minutes. Come back and record the approximate CPU load. Continuously move the mouse for 30 seconds, then see what the CPU load is. If it's the same, then it could be a larger underlying issue. If it jumps a significant amount, see what the program is that is causing such usage, and see what you can do about that program.
-
Responder a: Why my xbox one sensor is not sensing peopleThere are several things that you can do: 1. Start by making sure that all of the lenses are clean on the Kinect sensor bar. Use a soft microfibre cloth and use a polishing motion. On the IR sensor (the one that doesn't look like a normal camera), you may want to use a small amount of glass cleaner, but just use a little bit of water on the cloth to clean. There should barely be water, just enough to loosen dirt. 2. If the console itself is dusty, it may be thermal throttling to protect itself. Use the Xbox One Fan Replacement guide to remove the dust. Don't remove the heatsink unless you have additional thermal paste to reapply, and you know how to reapply the goop. Use a can of air to blow out the dust in a static-free environment. NEVER use a vacuum, as this can cause static buildup and zap your stuff. (Static electricity is bad for electronics). What is thermal throttling? Modern processors create massive amounts of heat, especially when they're under load. Computers, like consoles, have coolers on these ...
-
Responder a: Black screen on startup | No startup sound | Caps lock light works.Have you reseated the display connector? Reseat it, then do a NVRAM reset (hold down Cmd+Opt+P+R on startup), and if that doesn't fix it, try an SMC reset.
-
Responder a: Part of the components covered by a stickerIsopropyl alcohol is safe to use on most PCBs. Don't get it on any mechanical parts though, like optical or hard drives, or fans. Use 70-99% isopropyl alcohol and use a swab to dab it on, then if debris needs to be cleaned off, use a soft cloth. Once the debris is clear, dab on a little bit of alcohol over the surfaces in question, then let it evaporate completely. Don't get anhydrous alcohol, as pure chemicals can be dangerous and finicky to work with.
-
Responder a: old iPhone5 battery works fine, new battery flashes apple logoWhere exactly did you get the battery from? If it's not up to spec, or it can't communicate with the phone, it won't work. Some batteries CLAIM to be compatible, but contain the wrong number of cells, the wrong type of cells, or the improper wiring. Additionally, cheap batteries may not have the proper safety certification, posing a serious fire or explosion risk. iFixit's iPhone 5 Replacement Battery has all the pertinent safety information, as well as validation for power specs.
-
Responder a: I have power to the Xbox (it hums) but it won't turn on at allI would start by using the Xbox One Hard Drive Replacement guide. Skip steps 22 and 23, then follow the steps in reverse order to put your Xbox back together.
-
Responder a: Need help to get online- won't connectGet an Ethernet cable and connect your computer directly to the router. Open the device manager, then expand the section for network adapters. Find the network adapter that has 802.11, wireless NIC and/or WLAN. Right click on the adapter, then Update Driver Software. Search automatically for driver software. If it can't find it, right click, then click Properties. Go to the Details tab, then Hardware IDs. Do a web search for the shortest string, making sure to add any special symbols (&@^*). Find what the hardware's "dumb name" is (as opposed to the display or "smart" name). Find the manufacturer's website (Qualcomm, Realtek, etc) and get the latest driver.
-
Responder a: Echo slow to carry out commands, Cutting outIt sounds like a connectivity issue or speed issue. Are there any thick or dense (brick or steel backed) walls or any large chunks of metal (a refrigerator) or anything that creates interference (computer towers) close to your router or to the Echo? What's your internet speed, and what kind of load do you normally have on your network? If you notice that when streaming HD video, Echo has issues, then you may have a slow internet connection.
Comentários do guia
Horas ativas
O período do dia em que você esteve ativo nos últimos 90 dias. Cada linha do gráfico é uma ação que você executou no site (só contamos ações importantes, como votação ou edição de postagens). Os números na parte inferior do gráfico são a hora do dia em horário MST.
+30
+12
Reputação ao longo do tempo
Discriminação da reputação
| Evento | Contagem | Delta |
|---|---|---|
| Voto à favor da postagem | 85 | 1020 |
| Resposta aprovada | 23 | 644 |
| O administrador aprovou o seu guia | 1 | 100 |
| Alguém curtiu seu guia | 8 | 77 |
| Resposta Aceita | 1 | 10 |
| Votou negativo para o post | 2 | -4 |
| Voto contra à postagem | 14 | -84 |
Emblemas
1104645
Notificações recentes
Marcar todas como lidas
Show:
Tudo
Tudo
Não lidas
Você está por dentro de tudo! Não há nenhuma notificação nova.
-
Dorothy Wright commented on your answer to "My computer is frozen and unresponsive."
-
Dorothy Wright commented on your answer to "My computer is frozen and unresponsive."
-
Keith Wignall commented on your answer to "Echo slow to carry out commands, Cutting out"
-
jayeff commented on your answer to "The Printer won't turn on."
-
annie.dev16 commented on your answer to "The Printer won't turn on."
-
Alex222 accepted your answer to 'iPhone 5s stays at 1 percent battery and never charges up.'
-
Lillian Paz (MSP Student) commented on your answer to "My MP3 player won't turn on once I remove the charger."
-
pam matthews commented on your answer to "Printer stop printing black"
-
Moira Sharpe commented on your answer to "My MP3 player won't turn on once I remove the charger."
-
TronicsFix commented on your answer to "PS4 to TV (Black Screen but could hear sounds)"
-
nick gobram commented on your answer to "PS4 to TV (Black Screen but could hear sounds)"
-
Kevin commented on your answer to "iPhone 6 logic board, can I reflow solder in an oven?"
-
You were awarded the Técnico Aprendiz badge!
-
damiracle commented on 'Floppy Disk Teardown'
-
@reecee respondeu 'Headphone amp is not working?'
-
George A. commented on your answer to "Computer lagging, only if I touch the trackpad"
-
@rocharicardo51 accepted your answer to 'Computer lagging, only if I touch the trackpad'
-
ricardo commented on your answer to "Computer lagging, only if I touch the trackpad"
-
Siya commented on your answer to "How can I tell?"
-
@jurgenkoppen accepted your answer to 'Clean up, compatible OS for this vintage , and "harvesting"programs..?'
-
tveheim accepted your answer to 'Black screen on startup | No startup sound | Caps lock light works.'
-
illilala commented on your answer to "ipad 3 stuck on apple logo"
-
Jurgen commented on your answer to "Clean up, compatible OS for this vintage , and "harvesting"programs..?"
-
darkbluelink commented on your answer to "old iPhone5 battery works fine, new battery flashes apple logo"
-
Claudio Sposito commented on your answer to "Part of the components covered by a sticker"
-
Austin McBee commented on your answer to "I have power to the Xbox (it hums) but it won't turn on at all"
-
oldturkey03 commented on your answer to "iPod is disabled connct to itunes"
-
@oldturkey03 mentioned you in a comment
-
@oldturkey03 mentioned you in an answer.
-
TronicsFix commented on your answer to "I have power to the Xbox (it hums) but it won't turn on at all"
-
Lincoln Santos commented on your answer to "SD Card reader don't recognice any SD Card"
-
Ben commented on your answer to "iPhone 5s stays at 1 percent battery and never charges up."
-
Alex222 commented on your answer to "iPhone 5s stays at 1 percent battery and never charges up."
-
Alex222 commented on your answer to "iPhone 5s stays at 1 percent battery and never charges up."
-
George A. commented on your answer to "iPod is disabled connct to itunes"
-
Ben commented on your answer to "iPhone 5s stays at 1 percent battery and never charges up."
-
Alex222 accepted your answer to 'iPhone 5s stays at 1 percent battery and never charges up.'
-
willwordproc accepted your answer to 'replace battery needs a part list of the new battery?'
-
You were awarded the Ás de Respostas badge!
-
Death Gamer accepted your answer to 'Why does my mavic say there is EMI when I know theres not'
-
mayer commented on your answer to "My dog has started to stink bad"
-
@brendad24 accepted your answer to 'Touch ID not working after screen replacement'
-
Brenda commented on your answer to "Touch ID not working after screen replacement"
-
Brenda commented on your answer to "Touch ID not working after screen replacement"
-
mayer commented on your answer to "Where are the Wi-Fi antennas?"
-
@jurgenkoppen accepted your answer to 'Clean up, compatible OS for this vintage , and "harvesting"programs..?'
-
George A. commented on your answer to "UX301 - Am I able to clean fans and change battery by myself?"
-
George A. commented on your answer to "UX301 - Am I able to clean fans and change battery by myself?"
-
@eaglepanther accepted your answer to 'Camera not working. No hardware found.'
-
Nathalie Spoor commented on your answer to "Camera not working. No hardware found."
- Ver mais...
Come on man, everyone knows that scotch tape doesn't last more than a day. :)
They are a tad old...haha
Thanks! I tried...
Indeed! Neglect not.
Any memory kit that is either validated by Apple or that has the proper channel configuration (9-9-9-24) is okay to use. If you are looking for pure performance RAM, a kit of Corsair Vengeance RAM is okay to use (again, check the channel configuration), but most people will benefit from a kit of Corsair Mac Memory or the kit that iFixit provides in the volume of your choice.
Apple has meticulously balanced the MacBook's weight from left to right, and removing the optical drive may off-balance the Mac.
Is the channel configuration of your ram sticks correct? Mac needs 9-9-9-24 channel configuration. Something like Corsair Mac Memory or the kit that iFixit provides are in the correct channel configuration.