S500CA cant not reload Windows 8Replaced faulty hard drive and 24GB SSD had corrupted image. Tried to install via Windows 8 DVD. While in the install...
Resposta para "S500CA cant not reload Windows 8"Error Message: PAGE_FAULT_IN_NONPAGED_AREA Explanation: This Stop message occurs when requested data is not found in memory. The system generates a fault, which normally indicates that the system looks for data in the paging file. In this circumstance, however, the missing data is identified as being located within an area of memory that cannot be paged out to disk. The system faults, but cannot find, the data and is unable to recover. Faulty hardware, a buggy system service, antivirus software, and a corrupted NTFS volume can all generate this type of error. User Action: This Stop message usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, either main memory, L2 RAM cache, or video RAM). If hardware has been added to the system recently, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. Run hardware diagnostics supplied by the system manufacturer. For...