Introdução

We disassembled this iPod on September 13, 2006.

This teardown is not a repair guide. To repair your iPod Nano 2nd Generation, use our service manual.

Before we take it apart, here's some images of the new packaging. Here's the sexy, new, 52% less volume packaging Steve was so excited about.
  • Before we take it apart, here's some images of the new packaging.

  • Here's the sexy, new, 52% less volume packaging Steve was so excited about.

Adicionar comentário

The new packaging is innovative. Plastic retainers hold the iPod on top and bottom, and you must flex the plastic packaging to get the iPod out.
  • The new packaging is innovative. Plastic retainers hold the iPod on top and bottom, and you must flex the plastic packaging to get the iPod out.

Adicionar comentário

Meet the family. From left to right: Mini, new blue Nano, new black Nano, old black Nano.
  • Meet the family. From left to right: Mini, new blue Nano, new black Nano, old black Nano.

  • Ah, what to call it? iPod Nano Gen 2? iPod Mini Gen 3? Remastered iPod Nano? We vote for 'that little blue music thingy.'

Adicionar comentário

Goodies! Left to right:
  • Goodies! Left to right:

    • iPod

    • Fold-out quick start guide (includes two small white Apple stickers)

    • Plastic 'dock'

    • New earbuds

    • USB docking cable

  • The center button is concave, as opposed to the old Nano (flat), and old Mini (convex).

Adicionar comentário

It may be thinner than the old Nano, but it's sure not by much.
  • It may be thinner than the old Nano, but it's sure not by much.

Adicionar comentário

The back shouldn't scratch instantly anymore.
  • The back shouldn't scratch instantly anymore.

Adicionar comentário

On to the disassembly!
  • On to the disassembly!

  • Before opening your iPod, ensure that the hold switch is in the locked position.

  • Opening the iPod can be challenging. Don't get discouraged if it takes you a few tries before the iPod is opened.

Adicionar comentário

Carefully insert an iPod opening tool in the seam between the metal casing and white plastic top. Be careful not to damage the soft plastic with your tool.
  • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic top. Be careful not to damage the soft plastic with your tool.

  • The new Nano more closely resembles the old Mini design than the previous Nano generation.

Adicionar comentário

Lift the top bezel off of the iPod.
  • Lift the top bezel off of the iPod.

Adicionar comentário

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Pry the bottom bezel off using the same technique as the top.
  • Pry the bottom bezel off using the same technique as the top.

Adicionar comentário

Lift the bottom bezel off. It's glued on using a mild adhesive, so some force may be required.
  • Lift the bottom bezel off. It's glued on using a mild adhesive, so some force may be required.

Adicionar comentário

Remove the two Phillips #00 screws from either side of the dock connector.
  • Remove the two Phillips #00 screws from either side of the dock connector.

Adicionar comentário

Remove the two Phillips #00 screws from the top of the iPod.
  • Remove the two Phillips #00 screws from the top of the iPod.

Adicionar comentário

Pry out the headphone jack slowly with a spudger. Do not remove the headphone jack entirely, as it is connected via a fragile ribbon connector to the click wheel.
  • Pry out the headphone jack slowly with a spudger. Do not remove the headphone jack entirely, as it is connected via a fragile ribbon connector to the click wheel.

Adicionar comentário

Once you have pulled the headphone jack out of its slot, remove the Phillips #00 screw formerly concealed beneath it.
  • Once you have pulled the headphone jack out of its slot, remove the Phillips #00 screw formerly concealed beneath it.

Adicionar comentário

Remove the metal bracket surrounding the docking connector.
  • Remove the metal bracket surrounding the docking connector.

Adicionar comentário

Disconnect the headphone and click wheel cable from the logic board. It's tricky to see what you're doing, so you'll have to feel the connector inside the iPod with the spudger.
  • Disconnect the headphone and click wheel cable from the logic board. It's tricky to see what you're doing, so you'll have to feel the connector inside the iPod with the spudger.

  • You need to pry the connector toward the front of the iPod until it comes loose from the logic board.

  • Do not entirely remove the headphone jack. The cable is still connected to the click wheel.

Use a spudger to push the logic board assembly out of the casing. The click wheel and headphone jack should remain in the iPod.
  • Use a spudger to push the logic board assembly out of the casing. The click wheel and headphone jack should remain in the iPod.

  • Be careful not to catch the headphone jack and click wheel on the logic board as you remove the logic board and display.

Adicionar comentário

Completely remove the display and logic board from the iPod.
  • Completely remove the display and logic board from the iPod.

Adicionar comentário

We got it apart!
  • We got it apart!

  • The casing is certainly more scratch-resistant than the previous Nano. We were careful and didn't scratch the case at all.

Adicionar comentário

Pry the metal bracket off the back of the display. Make sure you only pry off the bracket and not the clear shielding on the rear of the display.
  • Pry the metal bracket off the back of the display. Make sure you only pry off the bracket and not the clear shielding on the rear of the display.

Adicionar comentário

Lift up the display and use a spudger to flip up the black plastic retaining bar holding the display ribbon cable in place.
  • Lift up the display and use a spudger to flip up the black plastic retaining bar holding the display ribbon cable in place.

Adicionar comentário

Slide the display ribbon out of its connector and lift the display off of the logic board.
  • Slide the display ribbon out of its connector and lift the display off of the logic board.

Adicionar comentário

Left: new Nano logic board and battery.
  • Left: new Nano logic board and battery.

  • Right: old Nano logic board and battery.

  • The new battery is thinner, but significantly larger.

  • The new Nano uses Samsung flash memory, just like the previous model.

  • Whatever you do, don't throw your new iPod into a fire!

Adicionar comentário

Close up of logic board. Here's some extra-large top and bottom logic board photos. Notice the Apple logo on the ARM chip. The numbers on it read: 33753291 8701 N02R5Q5 0627 ARM.
  • Close up of logic board. Here's some extra-large top and bottom logic board photos.

  • Notice the Apple logo on the ARM chip. The numbers on it read: 33753291 8701 N02R5Q5 0627 ARM.

  • That's it, folks! We sell parts for iPods (including this one), so check out our iPod parts store to fix up your old and broken iPods.

Adicionar comentário

sera que lo puedo pintar su skin es plomo pero quiero que sea azul.

Myriam Sarango - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 56

Últimos 30 dias: 248

Todo: 121,990