Esta desmontagem está em andamento – Atualizar periodicamente para ver as últimas alterações!

Ferramentas utilizadas neste teardown

Introdução

This is the teardown for the Apple iMac G3 Model M4984. I don’t think there is much more to say before beginning.

  1. The iMac G3. This was a great computer for the time, and had plenty of features.
    • The iMac G3. This was a great computer for the time, and had plenty of features.

    Adicionar comentário

  2. Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.
    • Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.

    Adicionar comentário

    • Remove this Phillips screw.

    • Using a flathead screwdriver, work your way around the bottom cover, until it comes off.

    • Then, lift the bottom cover up and out, and set it aside.

    Adicionar comentário

    • Now, remove the DB-15 Video connector from the logic board.

    • It may be helpful to use a Phillips screwdriver to remove the thumbscrews.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the power cable from the logic board assembly.

    Adicionar comentário

    • Remove the front panel connector.

    Adicionar comentário

    • Now, remove these Phillips screws.

    • Now, grab the logic board assembly by the piece of plastic, and lift it out.

    Adicionar comentário

    • The logic board assembly. This is the heart of the computer, it contains the motherboard, CPU, RAM, V-RAM, PRAM battery, the hard drive, and the optical drive.

    Adicionar comentário

    • To remove the bottom cover, remove these phillips screws, and pull the bottom cover off the iMac

    Adicionar comentário

    • Removing the faceplate:

    • Remove these phillips screws.

    • Now, pivot the faceplate up about 60 degrees and pull it away from the imac, with some wiggleing, it should come free

    Adicionar comentário

Chris Green

Member since: 11-10-2009

32.635 reputação

45 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

279 Membros

758 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 19

Últimos 30 dias: 81

Todo: 4,938