Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda

Tipo de Passo:

Arraste para reorganizar

There are six phillips head screws holding the PCB to the housing (sort of....the two in the middle of the PCB hold the camera module to the board but go ahead and remove those too)

The J00 phillips screwdriver bit should work nicely on these screws

If you look closely at the FPC cable connector...yep I dinged the hold down piece pretty badly scraping the adhesive...but you'll see I was more gentle and effective with the adhesive on the camera module FPC cable connector!

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.