Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Help
Editando passo 17 —

Tipo de Passo:

Arraste para reorganizar

To remove the logic board use an 8H pentalobe bit. Be sure to remove the 4 screws in the corners of the center plastic black air vent (this has to be done as it is mounted to the logic board's heat sink).

The two screws on the right are accessed through two cut-aways in the lobo's silicon board, essentially beneath the logic board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.