Ir para o conteúdo principal

O que você precisa

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Toaster, use o nosso manual de serviço.

  1. Teardown: Breville Toaster, Breville Toaster Teardown: passo 1, imagem 1 %32
    • Breville Toaster.

    • The toaster before the teardown process.

  2. Teardown: Breville Toaster: passo 2, imagem 1 %32 Teardown: Breville Toaster: passo 2, imagem 2 %32 Teardown: Breville Toaster: passo 2, imagem 3 %32
    • Turn the toaster upside-down.

    • Use the drill to unscrew the six slotted Spanner head screws

    • Use the drill with corresponding screwdriver bit to remove the Truss Phillip screws

    • The Slotted Spanner head screws hold the four rubber feet at the bottom of the casing.

  3. Teardown: Breville Toaster: passo 3, imagem 1 %32
    • Unattach the four rubber feet.

  4. Teardown: Breville Toaster: passo 4, imagem 1 %32 Teardown: Breville Toaster: passo 4, imagem 2 %32 Teardown: Breville Toaster: passo 4, imagem 3 %32
    • Detach the timer knob using a flat head screw driver

    • Remove the internal components from the red casing

  5. Teardown: Breville Toaster: passo 5, imagem 1 %32 Teardown: Breville Toaster: passo 5, imagem 2 %32 Teardown: Breville Toaster: passo 5, imagem 3 %32
    • Note: Red casing is still attached to the interior body of the toaster.

    • Detach electric circuit housing from red casing

  6. Teardown: Breville Toaster: passo 6, imagem 1 %32 Teardown: Breville Toaster: passo 6, imagem 2 %32
    • Firstly, unscrew the four Pan Phillip head screws

    • Then snap off the three welded plastic studs to detach the timer knob housing from the red casing

  7. Teardown: Breville Toaster: passo 7, imagem 1 %32 Teardown: Breville Toaster: passo 7, imagem 2 %32 Teardown: Breville Toaster: passo 7, imagem 3 %32
    • Unfasten the two Pan Phillip head screws to detach the buttons' housing

  8. Teardown: Breville Toaster: passo 8, imagem 1 %32 Teardown: Breville Toaster: passo 8, imagem 2 %32 Teardown: Breville Toaster: passo 8, imagem 3 %32
    • Note: There are two housings attach to both side of the interior body of the toaster.

    • Remove the two Pan Phillip head screws to detach the circuit board from the heat controller housing.

    • Then, remove the slider as well.

  9. Teardown: Breville Toaster: passo 9, imagem 1 %32 Teardown: Breville Toaster: passo 9, imagem 2 %32 Teardown: Breville Toaster: passo 9, imagem 3 %32
    • Remove the circuit board housing for the heat controller from the interior body of the toaster by unscrewing two Pan Phillip head screws

    • Remove the cable fasteners using a flat head screw driver

  10. Teardown: Breville Toaster: passo 10, imagem 1 %32 Teardown: Breville Toaster: passo 10, imagem 2 %32 Teardown: Breville Toaster: passo 10, imagem 3 %32
    • Separate the interior body of the toaster from the bottom cover.

    • Remove the screw caps

    • Unscrew the two Pan Phillip head screws to detach the aluminium vent

  11. Teardown: Breville Toaster: passo 11, imagem 1 %32 Teardown: Breville Toaster: passo 11, imagem 2 %32 Teardown: Breville Toaster: passo 11, imagem 3 %32
    • Use pliers to break apart the welded wires from the interior body.

    • Snip off the rest of the wires still attached to the interior body using a wire cutter

    • Remove the circuit board from its housing

  12. Teardown: Breville Toaster: passo 12, imagem 1 %32 Teardown: Breville Toaster: passo 12, imagem 2 %32
    • Separate the electric components from the interior body

  13. Teardown: Breville Toaster, Components of the Toaster Teardown: passo 13, imagem 1 %32
    • Insert wisdom here.

Aisyah Azmi

Membro desde: 09/30/18

217 Reputação

Autoria de 1 guia

11 comentários

Don’t buy this toaster…They fail and Breville won’t warranty it after 1 year….

Never again Breville..

James Payne - Responder

Thank you for this tear down guide. Though it’s built pretty well and feels like a tank, It doesn’t seem very repairable. Mine stopped working a couple months ago and I’m contemplating throwing it out. Comments?

David Vileta - Responder

any chance you still have the electronics for the toaster. Mine stopped working. It’s not the heating element. I THINK the issue is one of the components on the circuit board failed. I’ll buy the harness with the PCB from you, if it’s still around. Thanks.

Riccardo - Responder

Thanks very much for posting all of this, gave me the confidence to 'go in'.

Foe anyone thinking of doing what I just did; the guts of a plastic cased model can be put into a metal cased model but there are a few differences but everything you need is there.

Sean Johnson - Responder

Purchased a Breville die cast 2 slice toaster ($160). After one year it stopped toasting evenly and then on the out side of one slice. I am capable of fixing this but Breville will not sell parts, they want you to buy a new one. My first and last Breville product.

Lou Viscomi - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 12

Últimos 7 dias: 64

Últimos 30 dias: 240

Duração total: 19,479