Ferramentas utilizadas neste teardown

Introdução

This guide will walk you through the steps to completely disassemble a Sprint Airave.

This teardown is not a repair guide. To repair your Sprint Airave SCS-26UC2, use our service manual.

Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module.
  • Remove the external antenna, GPS cover, and GPS module.

Adicionar comentário

Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.
  • Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.

Adicionar comentário

Locate and remove the four Phillips screws
  • Locate and remove the four Phillips screws

Adicionar comentário

With the cover removed you now have access to the circuit board.
  • With the cover removed you now have access to the circuit board.

Adicionar comentário

Using an 8mm socket you can remove the antenna pigtail.
  • Using an 8mm socket you can remove the antenna pigtail.

Adicionar comentário

Release the clip indicate to remove the circuit board.
  • Release the clip indicate to remove the circuit board.

Adicionar comentário

Here is the circuit board fully removed. Here is the circuit board fully removed.
  • Here is the circuit board fully removed.

Adicionar comentário

Erik Leonard

Member since: 11-06-2011

164 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Todo: 2,979