Ferramentas utilizadas neste teardown

Introdução

I'm going to dissect an old friend, my first disc player. It is hoped that this teardown, while exposing the hydro-suspension and green-amber lighting, will reveal an awesomeness worthy of a Sony PS3 Slim (Gadget Lab Contest).

This teardown is not a repair guide. To repair your Sony D-822K Car Discman, use our service manual.

Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.
  • Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.

My gosh until now I totally forgot about this player, I had the exact same one for years !

Below - Responder

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

IanMaffett - Responder

Quote from IanMaffett:

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

It was expensive, wasn't it? I was expecting a little more sophistication in the suspension for the price.

modem21 - Responder

Oh, last week I found that missing illumination switch. When I put in, I'll try to fix the whining sound from the headphone output.

modem21 - Responder

Position unit so that the bottom is facing up. Remove the 6 screws.
  • Position unit so that the bottom is facing up. Remove the 6 screws.

  • Hold top and bottom of unit together as you turn the unit over, bottom facing down. Use caution; the upper and lower case, along with circuit board are now loose.

  • Watch out for the AVLS and illumination switches, they love to disappear when unsupervised. Remove top of case.

Adicionar comentário

Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader. Slide edge of ribbon cable connector towards ribbon cable to disengage. Unplug the red, white, and blue plugs from the circuit board.
  • Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader.

  • Slide edge of ribbon cable connector towards ribbon cable to disengage.

  • Unplug the red, white, and blue plugs from the circuit board.

Adicionar comentário

MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Observation: This is the Hydro Suspension system...really. Observation: This is the Hydro Suspension system...really.
  • Observation: This is the Hydro Suspension system...really.

Adicionar comentário

Remove circuit board Notice the dual-color light modules. (I temporarily connected the power to show off the lights) Notice the dual-color light modules. (I temporarily connected the power to show off the lights)
  • Remove circuit board

  • Notice the dual-color light modules. (I temporarily connected the power to show off the lights)

Adicionar comentário

Disconnect tailpiece, and power supply.
  • Disconnect tailpiece, and power supply.

Adicionar comentário

Remote: Remove the 3 screws from the bottom. Pull apart. The function buttons have a neat overlay design.
  • Remote: Remove the 3 screws from the bottom. Pull apart.

  • The function buttons have a neat overlay design.

Adicionar comentário

Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?
  • Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?

Adicionar comentário

modem21

Member since: 09-10-2009

84 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 16

Todo: 16,399