Ferramentas utilizadas neste teardown

Introdução

We disassembled this calculator on April 17, 2010.

This teardown is not a repair guide. To repair your Sanyo CX 110, use our service manual.

  • Here is the Sanyo CX 110 calculator.

Adicionar comentário

Now that we removed the back of the calculator, here is the battery and the back of the logic board.
  • Now that we removed the back of the calculator, here is the battery and the back of the logic board.

    • Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.

    • Positive contact for the battery.

    • Negative contact for the battery.

Adicionar comentário

  • Remove these 7 screws using a razor blade.

  • Be careful not to break the razor blade because it is fragile.

  • Turn the circuit board 180 degrees after removing screws.

Adicionar comentário

  • You will now see the circuit board and the buttons. Remove the buttons for the calculator.

Adicionar comentário

  • Now we're all done! Just take the LCD apart and you are done completely!

    • Sum-3 Sanyo Battery.

    • LCD Screen Parts (darkener, inverter, LCD screen.

    • Circuit Board for the calculator.

    • Buttons for the calculator (square root, memory, percent, operators, numbers, etc.)

    • Housing for the calculator.

okay teardown. My only advice is DON'T use the flash. I can barly see some of the pictures because of it. Use natural sun lighting or even a set of lamps spaced approaply. instead. Other than that, good attempt.

Nicholas Ouimet - Responder

samhnri

Member since: 07-04-2010

417 reputação

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 7

Todo: 4,730