Ir para o conteúdo principal

Ferramentas utilizadas neste teardown

Introdução

I've found a vacuum in my utility room. Since I almost never use it, I thought it was a good idea to see how it works... So let's go!!

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Rowenta AC6221, use o nosso manual de serviço.

  1. Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, imagem 1 %32 Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, imagem 2 %32 Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, imagem 3 %32
    • The 4.8 Rowenta vacuum can be used for a variety of purposes.

    • It is charged through its pedestal. The power of the pedestal is:

    • Input: 230V - 50 Hz - 7W (AC)

    • Output: 7.5V - 300 mA (DC)

  2. Rowenta AC6221 Teardown: passo 2, imagem 1 %32 Rowenta AC6221 Teardown: passo 2, imagem 2 %32 Rowenta AC6221 Teardown: passo 2, imagem 3 %32
    • This vacuum has several parts:

    • The tip

    • The reservoir which holds the dust and debris

    • The engine (4.8V)

    • The pedestal

    • The power supply

    • From top to bottom, the reservoir contains 3 parts: the housing, container, and filter.

  3. Rowenta AC6221 Teardown: passo 3, imagem 1 %32 Rowenta AC6221 Teardown: passo 3, imagem 2 %32 Rowenta AC6221 Teardown: passo 3, imagem 3 %32
    • Remove the two outer Philips #00 screws from the bottom of the engine.

    • The back of the circuit board will now be visible.

  4. Rowenta AC6221 Teardown: passo 4, imagem 1 %32 Rowenta AC6221 Teardown: passo 4, imagem 2 %32 Rowenta AC6221 Teardown: passo 4, imagem 3 %32
    • Remove the two inner screws.

    • Insert a flat screwdriver between the cover and the base of the engine and remove the cover.

    • The wires of the vacuum are now visible.

  5. Rowenta AC6221 Teardown: passo 6, imagem 1 %32 Rowenta AC6221 Teardown: passo 6, imagem 2 %32
    • The wires of the vacuum are now visible.

    • The wires connect the charger light, switch,engine, and power wires.

    • The green box labels the engine.

    • The orange box labels one of the four batteries (4*1.2V)

  6. Rowenta AC6221 Teardown: passo 7, imagem 1 %32 Rowenta AC6221 Teardown: passo 7, imagem 2 %32
    • The top of the circuit board contains components including capacitors, resistors, wires, and a chip.

    • The bottom side shows the tracks that connect the components.

  7. Rowenta AC6221 Teardown: passo 8, imagem 1 %32 Rowenta AC6221 Teardown: passo 8, imagem 2 %32
    • Remove the screw securing the handle with a screwdriver.

    • Open the handle to see the inside using the flat screwdriver.

    • Warning: The handle is difficult to open

    • Warning: In this procedure, the handle was not opened to keep the vacuum intact.

  8. Rowenta AC6221 Teardown: passo 9, imagem 1 %32
    • This is the pedestal that will be torn down.

  9. Rowenta AC6221 Teardown: passo 10, imagem 1 %32 Rowenta AC6221 Teardown: passo 10, imagem 2 %32 Rowenta AC6221 Teardown: passo 10, imagem 3 %32
    • At the bottom of the pedestal, remove the 4 rubber pieces.

    • Note: This step provides access to 4 Philips screws.

    • Remove screws using a screwdriver.

  10. Rowenta AC6221 Teardown: passo 11, imagem 1 %32
    • Lift the plastic piece carefully from the bottom of the pedestal.

  11. Rowenta AC6221 Teardown: passo 12, imagem 1 %32
    • Inside the pedestal, the power cable separates into 2 wires. Each wire is connected to a conductive piece.

    • This completes the vacum cleaner teardown

Bob

Membro desde: 17/04/2010

760 Reputação

3 Guias de autoria

One Comment

This could use some discussion of how to replace the rechargeable batteries used in portable vacuum cleaners.

Wayne Seltzer - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 53

Duração total: 6,797