Ferramentas utilizadas neste teardown

Introdução

The insides of a nice bluetooth mouse by Razer.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Razer Pro Click Mobile, use o nosso manual de serviço.

  1. The Razer Pro Click Mobile mouse served me well for over a year and a half. It's a compact bluetooth mouse that handles magnificently.
    • The Razer Pro Click Mobile mouse served me well for over a year and a half. It's a compact bluetooth mouse that handles magnificently.

    • Unfortunately, curiosity is not the only thing that drove me when I decided to do this teardown. The left button stopped working :(

    • therefore, I (am going to) FIX IT (see what i did there :] ?)

    Adicionar comentário

  2. And now, for the teardown. Open the battery compartment as you do every time this power hog runs out of juice. As you can see, i'm using rechargeables for that reason
    • And now, for the teardown. Open the battery compartment as you do every time this power hog runs out of juice. As you can see, i'm using rechargeables for that reason

    • Pull the two marked plastic elements outwards.

    Adicionar comentário

    • Remove the two philips screws marked.

    • There is a third screw under the sticker, on the underside of the mouse. The sticker breaks easily and this probably voids the warranty.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • You may now remove the main plastic cover.

    • The plastics are very thick and look firm. My model survived a LOT of abuse, but apparently i dropped it one time too many for the left button to work.

    Adicionar comentário

    • Now we may remove the main board.

    • The device consists of two chips

      • The optical sensor is on the middle unit signed: A3030 B0741F

      • The second chip is on a separate, blue board. On it there is a white sticker with "Razer" and N553_v1.2_ signed on it

    • The rest of the elements are LEDs, buttons, the wheel mechanism, a single capacitor and springs for the battery

    Adicionar comentário

    • On the bottom we see the lens, the on/off switch and the reset button

    • I love the little window they did for the capacitor.

    • The optical sensor looks freaky. I wonder which crazy government is watching me now.

    Adicionar comentário

    • The batteries look enormous when inserted now. They weigh significantly more then the board itself.

    Adicionar comentário

    • For a size comparison, here is the mouse, the original iPhone, a 2 polish zloty coin and a party invitation :)

    I like the size comparison!

    Mitra Cline - Responder

    That blue board is probably the bluetooth daughterboard. The part towards the back of the mouse with just a few gold-colored traces on it is probably the antenna.

    TuxRug - Responder

    I got a question,

    a friend tell me that bluetooth mouse use a usb protocol,

    does that is true?

    if so, can a bluetooth mouse board can be use to connect an usb mouse or keyboard to a bluetooth computer?

    thx

    emericrobert - Responder

baq

Member since: 14-10-2009

296 reputação

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 11,359