Conserte seus objetos Comunidade Loja

Power Mac G4 M5183 Teardown STEM Project

Escrito Por: Harrison Case (e outro colaborador)
Publicado em: November 6, 2016
  • Comentários: 4
  • Favoritos: 3
  • Visualizações: 3,3 mil

Power Mac G4 M5183 Teardown STEM Project

Escrito Por: Harrison Case (e outro colaborador)
Publicado em: November 6, 2016
  • Comentários: 4
  • Favoritos: 3
  • Visualizações: 3,3 mil

Teardown

Introdução

This guide is for my engineering class. My goal is to show you how to fully gut a Power Mac G4.

O que você precisa

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Power Mac G4 M5183, use o nosso manual de serviço.

  1. Power Mac G4 M5183 Teardown STEM Project, Case: passo 1, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Case: passo 1, imagem 2 %32

    • Pull the tab to open the case.

    Editar

  2. Power Mac G4 M5183 Teardown STEM Project, RAM: passo 2, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, RAM: passo 2, imagem 2 %32

    • Pull the white tabs down

    • Lift up the RAM

    • Repeat x4

    Editar

  3. Power Mac G4 M5183 Teardown STEM Project, Heat-sink: passo 3, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Heat-sink: passo 3, imagem 2 %32

    • Use a flat head screwdriver or spudger to lift up the tabs that hold down the heat-sink.

    • Repeat x2

    • The heat-sink should just lift right off.

    Editar

  4. Power Mac G4 M5183 Teardown STEM Project, GPU: passo 4, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, GPU: passo 4, imagem 2 %32

    • Remove highlighted screw.

    • The GPU should lift right out.

    Editar

  6. Power Mac G4 M5183 Teardown STEM Project, Mother Board: passo 5, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Mother Board: passo 5, imagem 2 %32 Power Mac G4 M5183 Teardown STEM Project, Mother Board: passo 5, imagem 3 %32

    • Remove highlighted cables.

    • Remove highlighted screws.

    • Lift out the motherboard. (Note: pull to the left to clear the ports from the case)

    Editar

  7. Power Mac G4 M5183 Teardown STEM Project, CPU: passo 6, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, CPU: passo 6, imagem 2 %32

    • Remove highlighted screws.

    • After removing the screws, simply lift off the CPU from the connector. Use only a minimal amount of pressure when pulling the CPU from the connector.

    • This is the connector after removal of the CPU.

    Editar

  8. Power Mac G4 M5183 Teardown STEM Project, DVD/ROM drive: passo 7, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, DVD/ROM drive: passo 7, imagem 2 %32 Power Mac G4 M5183 Teardown STEM Project, DVD/ROM drive: passo 7, imagem 3 %32

    • Remove the face plate. You are supposed to press down the highlighted tabs from the inside.

    • Remove highlighted screws.

    • Slide out the drive. (MAKE SURE TO UNHOOK THE CABLES)

    Editar

  9. Power Mac G4 M5183 Teardown STEM Project, Hard drive: passo 8, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Hard drive: passo 8, imagem 2 %32 Power Mac G4 M5183 Teardown STEM Project, Hard drive: passo 8, imagem 3 %32

    • Remove the highlighted cables.

    • Remove highlighted screw.

    • Lift out the hard drive.

    Editar

  10. Power Mac G4 M5183 Teardown STEM Project, Main Fan: passo 9, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Main Fan: passo 9, imagem 2 %32

    • Remove highlighted screw. ( SAME SCREW ON OPPOSITE SIDE, REMOVE THAT AS WELL.)

    • Disconnect the connector.

    • After that, just pull it out.

    Editar

  11. Power Mac G4 M5183 Teardown STEM Project, Power Supply: passo 10, imagem 1 %32 Power Mac G4 M5183 Teardown STEM Project, Power Supply: passo 10, imagem 2 %32 Power Mac G4 M5183 Teardown STEM Project, Power Supply: passo 10, imagem 3 %32

    • Use a 2.5 mm hex key to remove these screws.

    • Remove highlighted screw.

    • Feed the wires through the highlighted hole, then pull out the power supply.

    Editar

  12. Power Mac G4 M5183 Teardown STEM Project, Finished!: passo 11, imagem 1 %32

    • You will be left with an empty case.

    Editar

Autor(a)

com 1 outro contribuidor

Harrison Case

Membro desde: 11/06/16

128 Reputação

Autoria de 1 guia

Emblemas: 0

4 comentários

Just a little tip.

APPLE tend to use screw connections as a means of ground continuity.

That is - if the CPU card is not screwed down - it might not power on.

Mal - Responder

The is a kit from thelaserhive.com to allow an mATX board to be used inside the G4 cases.

Pete Karnowski - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 42

Duração total: 3,356