Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

This is a quick teardown of the playstation move controller.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua PlayStation Move, use o nosso manual de serviço.

  1. Playstation Move Controller
    • Playstation Move Controller

  2. Remove the 4 screws holding the back over and trigger button on.
    • Remove the 4 screws holding the back over and trigger button on.

  3. Once open you will see two ribbon cables. The one connected to the trigger button is removable.
    • Once open you will see two ribbon cables.

    • The one connected to the trigger button is removable.

    • The ribbon cable attached to light globe is soldered on.

  4. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated.
    • Light Globe Cover and the LED Module can be separated.

  5. The battery can easily be removed. There is connector on the side of the board.
    • The battery can easily be removed. There is connector on the side of the board.

    • Battery Specs: Single Cell 1380 mAh 3.7 Volt

    • Sony Part: LIS1441

  6. Remove the inner plastic (1 Screw) frame to expose the logic board
    • Remove the inner plastic (1 Screw) frame to expose the logic board

    • Remove the 2 top screws and one bottom screw to remove the logic board from the controller.

  7. Logic Board Chip Closeups Included 503A 04c ALPS - Radio Module
    • Logic Board

    • Chip Closeups Included

    • 503A 04c ALPS - Radio Module

    • AKM8974948D - MEMS Gyroscope

mcwiggin

608 Reputação

3 Guias de autoria

AKM 8974 - 3-axis Electronic Compass

Xeno - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 35

Últimos 30 dias: 140

Duração total: 14,948