Introdução

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

Vídeo de Apresentação

  1. Remove the three rubber feet, warranty sticker and four screws.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

    Adicionar comentário

  2. Slide the HDD cover toward the rear of the device to remove it.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

    Adicionar comentário

    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

    Adicionar comentário

    • Repeat step 3 for the front top finisher.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

    Adicionar comentário

    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

    Adicionar comentário

    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

    Adicionar comentário

    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

    Adicionar comentário

    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

    good job you just broke the ps3 super slim

    korvanjundskyrim - Responder

  4. Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

18 outras pessoas concluíram este guia.

ZFix

Member since: 09-12-2013

160.200 reputação

304 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

279 Membros

758 Guides authored

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - Responder

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Lionheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - Responder

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - Responder

Step 4: “simply remove the front finisher” - are you kidding me? I nearly broke mine!

versluis2000 - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 22

Últimos 7 dias: 161

Últimos 30 dias: 702

Todo: 30,078