Ir para o conteúdo principal

Introdução

In this tutorial, I will show you how to disassemble the Nokia 3210.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Nokia 3210, use o nosso manual de serviço.

  1. Remove Battery cover, battery and SIM Card.
    • Remove Battery cover, battery and SIM Card.

  2. Remove the antenna with your fingers.
    • Remove the antenna with your fingers.

  3. Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.
    • Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.

  4. If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).
    • If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).

  5. Here's the PCB with removed EMI shields.
    • Here's the PCB with removed EMI shields.

    • CCONT NMP70467 Power Management IC

    • NMP0581 Power Supply IC

    • BGY252 and BGY 262 UHF Amplifier

  6. Other side of the PCB.
    • Other side of the PCB.

    • Hitachi HWYN202A 900MHz Duplexer

    • Intel F160B3TA Flash

    • Atmel 24C128 EPROM

    • Samsung KM68U1000 SRAM

    • Buzzer MZT-03C

    • Texas Instruments MAD2PRI Microcontroller (ARM Based)

  7. Disassembly Completed!
    • Disassembly Completed!

Bryan

Membro desde: 27-10-2012

690 Reputation

5 Guias de autoria

yaaaaas queeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeen

Gaubrisco - Responder

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 8

Past 30 Days: 24

All Time: 4,842