Ferramentas utilizadas neste teardown

Introdução

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Mouse, use o nosso manual de serviço.

  1. Rotate mouse over and locate Trackball cover
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

    Adicionar comentário

  2. After the Trackball cover has been rotated, pry the lid off using fingernails.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

    Adicionar comentário

    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

    Adicionar comentário

    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

    Adicionar comentário

Kevin Gingrich

Member since: 06-10-2011

172 reputação

2 Guides authored

Equipe

Cal Poly, Team 20-28, Maness Fall 2011 Membro de Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Membros

7 Guides authored

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Responder

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 27

Todo: 3,009