Introdução

This wireless router stopped working, so I wanted to take a look at it's innards.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Linksys BEFW11S4, use o nosso manual de serviço.

Waiting to be disassembled...
  • Waiting to be disassembled...

Adicionar comentário

Remove antennas.
  • Remove antennas.

  • Remove nuts and washers around antenna connectors.

  • Push in antenna connectors.

Adicionar comentário

  • Remove feet (with flat-head screwdriver, fingernails, etc).

  • Unscrew the screws.

Adicionar comentário

  • Pull apart blue front from black back with a LOT of force.

  • Slide and pull up bottom. (Make sure the antenna connectors get through.)

Adicionar comentário

  • Twist and pull out antenna connector feeds.

Adicionar comentário

  • Pull up RF shield from motherboard.

  • Unscrew the motherboard from the bottom.

  • Push the motherboard forward (as in this picture) to unlatch it from the bottom.

Adicionar comentário

  • Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router.

  • Push the card forward to deattach the pins.

  • Remove the card from the metal holdster.

Adicionar comentário

  • Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

  • Macronix 29F040QC-90

  • ISSI IS41C16100S-50K

  • SAMSUNG ARM S3C4510X01-QERO

  • RMC RTL8019AS

  • Bothhands FB2022

  • Bothhands 40ST1041E

  • Kendin KS8995. Kendin has since been bought by Micrel.

Adicionar comentário

  • Enjoy!

Adicionar comentário

William

Member since: 18-04-2010

65 reputação

Autoria de 1 guia

what is that card inside this router

hartiTube - Responder

Thank you. I accomplished this task. Except my antenna wires were soldered to the board.

Darren - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 10

Todo: 8,441