Conserte seus objetos Comunidade Loja

Eufy Video Doorbell 2k (Battery-Powered) Teardown

Escrito Por: Muzaffar (e outro colaborador)
Publicado em: December 3, 2022
  • Comentários: 9
  • Favoritos: 0
  • Visualizações: 3,2 mil

Eufy Video Doorbell 2k (Battery-Powered) Teardown

Escrito Por: Muzaffar (e outro colaborador)
Publicado em: December 3, 2022
  • Comentários: 9
  • Favoritos: 0
  • Visualizações: 3,2 mil

Teardown

Introdução

Eufy Video Doorbell 2K (Battery-Powered) a doorbell security camera that can be installed outdoors. Unfortunately for my unit, water got inside and fried a chip rendering the unit inoperable after 2 years of service. Since Eufy does not have a repair centre here in Malaysia, I decided to open it up and take a look inside.

note: Most of the images I took was is Portrait, thus images might be slightly weird or looks like it was rotated to the left.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Eufy Doorbell 2k (Battery-Powered), use o nosso manual de serviço.

  1. Eufy Video Doorbell 2k (Battery-Powered) Teardown, Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 1, imagem 1 %32

    • Using Phillips 000 screw driver remove 8 screws at the back.

    Editar

  2. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 2, imagem 1 %32

    • Using a metal or plastic prying tool, insert it in between the seems. Then carefully lift the back unit out. Once one side is open simply lift it out from the front cover.

    Editar

  3. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 3, imagem 1 %32 Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 3, imagem 2 %32 Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 3, imagem 3 %32

    • Battery is connected to the main board. Using a tweezer remove the battery connector.

    Editar

  5. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 4, imagem 1 %32

    • Water manage to get into my unit and fried this chip. Suggest you use a rain cover if this doorbell is expose to weather outdoors. There are a lot of 3D printed rain covers for this doorbell.

    Editar

  6. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 5, imagem 1 %32 Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 5, imagem 2 %32

    • Remove 4 screws with a Phillips 000.

    • Remove 2 screws with a Phillips 0.

    Editar

  7. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 6, imagem 1 %32

    • Disconnect the connector.

    • Disconnect the connector.

    • CCD of the camera

    • Do not touch the CCD. If finger prints got stuck it will be difficult to clean.

    Editar

  8. Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 7, imagem 1 %32 Eufy Video Doorbell 2k (Battery-Powered) Teardown: passo 7, imagem 2 %32

    • Battery details and specification.

    • You can use a multimeter to check the voltage of the battery. Mine was still good at 3.9V. Unfortunately the chip got fried.

    Editar

Autor(a)

com 1 outro contribuidor

Muzaffar

Membro desde: 05/12/19

145 Reputação

Autoria de 1 guia

Emblemas: 0

9 comentários

Goodacternoon po Maam/Sir?

pwedi poba mag order board lang

LAMPUTE VENT - Responder

And what happends next?

kubakumate - Responder

This is great. Any suggestions for sourcing a new battery pack?

Tezza - Responder

My battery may be shot. Same as in pics. Where can I get a replacement?

Joe Guy - Responder

I tried changing the battery in mine. Got it sourced individual cell and attached to the existing points (by removing old cells). It got really hot. Seems my chip got fried as well. Not sure how to check if there is anything else faulty than BAttery Chip?

Rishi Gaurav Gupta - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 11

Últimos 30 dias: 32

Duração total: 3,234