Ferramentas utilizadas neste teardown

Introdução

The only tools needed are a philips screwdriver and a narrow putty knife.

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Belkin Express Dock, use o nosso manual de serviço.

  1. View of the connectors
    • View of the connectors

    Adicionar comentário

  2. Use a putty knife to remove the four rubber feet.  Once removed, there are 4 phillips screws to be removed.
    • Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

    Adicionar comentário

    • Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

    Adicionar comentário

    • Front and back of the board.

    • From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

    • From left to right on the back of the board the major chips are: Parade PS161HDM; Parade PS8301 (two); NXP ZSD310 (two); Parade PS8321. The chips seem to support HDMI/DVI conversion and Display Port!

    Adicionar comentário

    • close-ups of the major chips

    Adicionar comentário

thompsonfamily

Member since: 21-01-2011

217 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 34

Todo: 3,852