Conserte seus objetos Comunidade Loja

Actiontec Q1000 Teardown

Escrito Por: jdp23 (e outro colaborador)
Publicado em: August 23, 2013
  • Comentários: 3
  • Favoritos: 9
  • Visualizações: 6,5 mil

Actiontec Q1000 Teardown

Escrito Por: jdp23 (e outro colaborador)
Publicado em: August 23, 2013
  • Comentários: 3
  • Favoritos: 9
  • Visualizações: 6,5 mil

Teardown

Introdução

This teardown is a working Actiontec Q1000 Modem, sold by Qwest as a Qwest Q1000.

O que você precisa

Este teardown (desmontagem analítica) não é um guia de reparo. Para reparar seu/sua Actiontec Q1000 DSL Modem, use o nosso manual de serviço.

  1. Actiontec Q1000 Teardown, Actiontec Q1000 Teardown: passo 1, imagem 1 %32 Actiontec Q1000 Teardown, Actiontec Q1000 Teardown: passo 1, imagem 2 %32 Actiontec Q1000 Teardown, Actiontec Q1000 Teardown: passo 1, imagem 3 %32

    • The Qwest Q1000 modem, made by Actiontec.

    • Port side with antennas detached.

    • DSL and Phone in ports

    • 4 Ethernet ports

    • USB port, reset button, and power jack

    • Not a screw in sight.

    Editar

  2. Actiontec Q1000 Teardown: passo 2, imagem 1 %32 Actiontec Q1000 Teardown: passo 2, imagem 2 %32 Actiontec Q1000 Teardown: passo 2, imagem 3 %32

    • As usual, the rubber feet are hiding screws!

    Editar

  3. Actiontec Q1000 Teardown: passo 3, imagem 1 %32 Actiontec Q1000 Teardown: passo 3, imagem 2 %32 Actiontec Q1000 Teardown: passo 3, imagem 3 %32

    • Nothing really to see here...

    • Remove the 2 antenna wires from the wifi card. One is also taped to the back of the board.

    • The circuit board is finally free!

    Editar

  4. Actiontec Q1000 Teardown: passo 4, imagem 1 %32 Actiontec Q1000 Teardown: passo 4, imagem 2 %32

    • Looks like someone was generous with the thermal paste.

    • Underneath the cover:

    • Broadcom BCM6366

    • Broadcom BCM53115

    Editar

  6. Actiontec Q1000 Teardown: passo 5, imagem 1 %32 Actiontec Q1000 Teardown: passo 5, imagem 2 %32

    • The Wi-Fi card lets down its shield...

    • The chip is a BCM4322.

    Editar

  7. Actiontec Q1000 Teardown: passo 6, imagem 1 %32 Actiontec Q1000 Teardown: passo 6, imagem 2 %32

    • The inside of the top case.

    • The antenna connectors are screwed onto the case.

    Editar

  8. Actiontec Q1000 Teardown: passo 7, imagem 1 %32 Actiontec Q1000 Teardown: passo 7, imagem 2 %32

    • The antenna connectors have gold-plated coax connectors and standard Wi-Fi antenna connectors.

    • What's underneath the heat-shrink? A ferrite bead to minimize interference.

    Editar

  9. Actiontec Q1000 Teardown: passo 8, imagem 1 %32 Actiontec Q1000 Teardown: passo 8, imagem 2 %32 Actiontec Q1000 Teardown: passo 8, imagem 3 %32

    • Testing out the light pipe with an LED throwie...

    • The light pipe takes light from tiny surface-mount LEDS on the motherboard and refracts it to the panel.

    • Here are all the LEDS:

    • 8 of the LEDS that work with the light pipe

    • One more surface mount LED

    • A white LED for illuminating the Qwest logo

    • A dual-color (red/green) LED for the WPS status indicator.

    Editar

  10. Actiontec Q1000 Teardown: passo 9, imagem 1 %32 Actiontec Q1000 Teardown: passo 9, imagem 2 %32 Actiontec Q1000 Teardown: passo 9, imagem 3 %32

    • The empty shell that once held a DSL modem.

    • The 2 detachable Wi-Fi antennas. Nothing to tear down here!

    Editar

  11. Actiontec Q1000 Teardown: passo 10, imagem 1 %32

    • Repairability score: 8/10

    • The entire device is held together with only 4 screws.

    • The Wi-Fi antenna connectors are screwed in and the cables are not soldered to the board.

    • The antennas are replaceable as well.

    • The heat sink is soldered in place, making removal difficult.

    • The Wi-Fi card is soldered in and held in place with silicon adhesive, making it impossible to remove without damaging the card or the device.

    Editar

Documentos anexados

Autor(a)

com 1 outro contribuidor

jdp23

Membro desde: 08/22/13

1.302 Reputação

Autoria de 23 guias

Emblemas: 24

+21 outros emblemas

3 comentários

Awesome teardown! These things have gotten so simple. Those antennas would be pretty easy to repurpose for something else.

Kyle Wiens - Responder

What are the part number, volts, and amps of the power supply?

PDXTek - Responder

Hello. I have one of these that I want to switch the antenna for. Are you able to tell me which of the antenna wires is the positive and neutral (I realize the antenna itself doesn’t have positive & neutral, but I don’t know the relevant term). Both wires are grey and hooked together so it’s not easy to tell

https://d3nevzfk7ii3be.cloudfront.net/ig...

earthscope - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Duração total: 6,581