iPad 4 Front Glass/Digitizer Touch Panel Full Assembly

iPad 4 Front Glass/Digitizer Touch Panel Full Assembly

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$39.99

$39.99

Enviaremos uma mensagem quando o produto estiver disponível em estoque.

Deck the Halls
With tools and Fix Kits

Detalhes do produto

Características

Características

This iPad 4 Front Glass/Digitizer Touch Panel Full Assembly includes the small parts and adhesive pre-installed in the assembly, saving time and increasing the quality of your screen repair.

Digitizer Full Assembly includes (items pre-installed on the front panel):

Fix Kit includes:

This Fix Kit includes iFixit’s iOpener, a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in the microwave and is reusable.

iOpener Toolkit includes:

Note: When performing the repair, you may damage the bezel or Wi-Fi and Bluetooth antenna. You may want to buy those parts just in case and if you don't end up using either of them, you can return them.

Compatibilidade

iPad 4 CDMA
16 GB LTE/CDMA (4th Gen)
32 GB LTE/CDMA (4th Gen)
64 GB LTE/CDMA (4th Gen)
iPad 4 GSM
16 GB LTE/GSM (4th Gen)
32 GB LTE/GSM (4th Gen)
64 GB LTE/GSM (4th Gen)
iPad 4 Wi-Fi
16 GB Wi-Fi (4th Gen)
32 GB Wi-Fi (4th Gen)
64 GB Wi-Fi (4th Gen)

Histórias de Reparos

Avatar do usuário
zedziechn's Story Photo #1137924

Meu Problema

My son is 5 years old. So as you can suspect, he dropped and it, shattering the corner and sending a large crack across the entirety of the screen. I bought a screen protector to cover the cracks, until he dropped it again. After the other corner was splintered, it was time.

Minha Solução

I followed the instructio . . .

Avatar do usuário

Meu Problema

iPad screen was shattered

Minha Solução

I was able to remove the iPad with the help of the iFIXIT Kit. it was the dented corner that made it more difficult. I was able to push the metal back but not completely as the corners started to split the metal. I then took a Dremel and smoothed out the corners and . . .

Avatar do usuário

Meu Problema

Dropped my 5-year old iPad 4 onto the pavement

Minha Solução

The whole process went relatively well.

Meu Conselho

If your glass is shattered or cracked anywhere near the edges, get ready to deal with lots of little pieces of glass. Work on a surface that is easy to clean. WEAR EYE PROTECTION!!! Several times, during the process . . .

Avatar do usuário

Meu Problema

Front glass all cracked

Minha Solução

Removing glass was a ##&&% and took long coming off a small piece at a time. Now that I did once it would be simple if had to do again

Meu Conselho

Safety glasses a must

Avatar do usuário

Meu Problema

My daughter dropped the iPad.

Minha Solução

Awesome. Had originally replaced it with a cheaper glass digitizer and my daughter dropped it and cracked it again. With all the included goodies I had it opened up in about 8 minutes.

Meu Conselho

Take your time, read through the guide before taking the unit apart and then go all in . . .

Avatar do usuário

Meu Problema

3 foot drop onto hardwood floor completely shattered the glass.

Minha Solução

I followed the directions for the most part. Due to the sheer amount of damage I didn't heat the adhesive for fear of overheating LCD or some other component. I'm not sure if this is an acual concern, but basically the glass was off othe . . .

Avatar do usuário

Meu Problema

After three years, my self-described clumsy wife finally dropped her iPad 4 the right way and shattered the glass screen.

Minha Solução

The repair was super hairy at first--as it happens, the exact spot where the guide tells you to start prying open the front panels is where my iPad's screen was utterly shattered. . . .

Avatar do usuário

Meu Problema

Cracked screen

Minha Solução

The repair went ok—a cracked screen makes the glass removal much more difficult. The main issue was reassembly and especially the home button cable. It is extremely difficult to get that back into place and, unfortunately, the tools do not make it easy.

As it stands now, the home . . .

Avatar do usuário

Meu Problema

I had flickering vertical grey lines accross the entire screen. I thought it could be a bad cable.

Minha Solução

The repair went flawlessly. Screen and cables were replaced with no issues. Unfortunately, that didn't fix the original problem. I am guessing the real issue is the graphics on the logic board.

Meu Conselho

You have . . .

Avatar do usuário

Meu Problema

The Screen Was shattered

Minha Solução

THe repair was successful but the iOpener was not as useful as expected. Essentially it did not warm the glue of the iPad enough to remove the screen well. If doing it again I would likely use a hair dryer or heat gun to warm the iPad more and loosen the glue rather than th . . .

Mostrar mais