Meu Problema
Battery wouldn't hold a charge
Minha Solução
Replaced the battery but I the battery won't charge
Meu Conselho
Get an extra battery
Este produto não está disponível no seu país.
Código do item: IF317-092-1
Este produto não está disponível no seu país.
US$ 19,99
Em promoção
Peças usadas do estoque A estão em excelente estado
Peças de estoque B possuem leves marcas de uso
Peças de estoque C possuem marcas profundas de uso, mas ainda funcionam plenamente
US$ 19,99
Em promoção
Fora de estoque
Não temos tanto estoque assim disponível
Detalhes do produto
Descrição
Descrição
60w Classic style soldering iron from Hakko. This reliable dual-coil iron maintains a temperature of approximately 460 to 485 Celsius. Includes a chisel tip. Great iron for home and hobby use.
Histórias de Reparos
Battery wouldn't hold a charge
Replaced the battery but I the battery won't charge
Get an extra battery
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemble though, so all worked out well.
One important piece of advice. The ifixit instructions list a #00 Philips screwdriver under tools however I needed a #0000 Philips to get the screws out.
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .
Clientes também compraram
Produtos destacados