MacBook Unibody (A1342) Lower Case

  • MacBook Unibody (A1342) Lower Case
MacBook Unibody (A1342) Lower Case

US$149,99

US$149,99

Enviaremos uma mensagem quando o produto estiver disponível em estoque.

Detalhes do produto

Descrição

Descrição

Replace a dented or scratched lower case compatible with a Model A1342 MacBook Unibody laptop.

Compatibilidade

Compatibilidade

  • MacBook 13" Unibody A1342 Late 2009 to Mid 2010

Especificações

Especificações

Part #:
922-9183, 661-5974
Model #:
A1342

Compatibilidade

MacBook Unibody A1342
2.26 GHz
2.4 GHz

Histórias de Reparos

Avatar do usuário
gveldman's Story Photo #462277

Meu Problema

A few weeks ago the rubber coating released it self, caused by the heat, from the lowercase of our Macbook, end 2009 version. Because the Apple replacement program was not applied on this Macbook, I decided to repair it my self. The Macbook is in perfect state, including 4GB memory and running Yosem . . .

Avatar do usuário

Meu Problema

Rubberized on original back was coming off. Rubber stretched and buckled over time

Minha Solução

Easy, eight screws and done. Finding the correct back from other vendors was the greatest headache

Meu Conselho

call Fixit first.

Avatar do usuário

Meu Problema

My partners late 2009 Macbook started to fall apart all at once. The rubberised bottom peeled off, the batter stopped holding a charge and the fan failed.

I replaced the laptop with a new macbook and kept the old one until it failed completely which was the day after it was replaced.

A year later . . .

Avatar do usuário

Meu Problema

Bottom was missing screws, and rubber was coming off the metal. Was not affecting operation of the laptop. More cosmetic than anything.

Minha Solução

Got the new bottom and screws in the mail a few days after I ordered them, removed the old bottom, and installed the new bottom within minutes. Very easy to do.

Meu Conselho

N . . .

Avatar do usuário

Meu Problema

Heavy-duty processing warms up the underside of my MacBook, and eventually the rubber layer on the base-plate released itself from the metal where the heat is most intense and created a large bubble. The computer couldn't sit flat on a tabletop anymore, so a replacement base-plate was required.

Minha Solução

The n . . .

Avatar do usuário

Meu Problema

My wife's Macbook stopped charging. After a short troubleshooting I figured out that the Magsafe connector was at fault. Also, as the laptop was mostly used on soft covered surfaces, cooling was poor, causing some overheating of the lower case, hence causing bubbling of the non slippery rubberized s . . .

Avatar do usuário

Meu Problema

Because it was broken.

Minha Solução

10 min. Done.

Meu Conselho

It's great. Never grab your chick and through it to the bed when the laptop is sitting there. The display screen may suffer.

Avatar do usuário

Meu Problema

The old case was coming apart and needed to be replaced.

Minha Solução

Very easy, just remove old case and replace with the new one.

Meu Conselho

Having the right screwdriver made the job easier. Would recommend that first.

Mostrar mais