MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

  • MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board
  • 360°
360
MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

Condição: Usado

US$44,99

US$44,99

Enviaremos uma mensagem quando o produto estiver disponível em estoque.

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

Detalhes do produto

Descrição

Descrição

Is your laptop not charging correctly?

This part connects the wall adapter power to the logic board. A safe magnetic connection prevents damage to the laptop caused by tripping over the power cord. Identified by 820-2361-A printed on board.

Compatibilidade

Compatibilidade

  • MacBook Pro 17" Unibody A1297 Early 2009 or Mid 2009

Especificações

Especificações

Part #:
661-4950

Compatibilidade

MacBook Pro 17" Unibody
2.66 GHz (Early 2009)
2.8 GHz (Mid 2009)
2.93 GHz (Early 2009)
3.06 GHz (Mid 2009)

Histórias de Reparos

Avatar do usuário

Meu Problema

DC-in port was defective. The charging connector would get hot and make a soft high pitched electronic "squeal." Eventually the two outer prongs on my chargers would melt down to little nubs to the point where the computer wouldn't even charge anymore. I let the damage get so bad that my DC-in port . . .

Avatar do usuário

Meu Problema

My MagSafe dc in board was charred from using an old charger (possibly wrong voltage) and continued to work, but only if the charger sat at a specific angle.

Minha Solução

WARNING My 2011 MBP 17" uses a Torx T6 as well as a Phillips#00, that was not mentioned in the ifixit guide, but luckily I was able to g . . .