MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board

  • MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board
MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board

US$39,99

US$39,99

Enviaremos uma mensagem quando o produto estiver disponível em estoque.

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

Detalhes do produto

Descrição

Descrição

Replace a broken or damaged MagSafe DC-in board for your Mid 2012 or Early 2013 MacBook Pro 15" Retina with this part. This part connects wall adapter power to logic board.

Compatibilidade

Compatibilidade

  • MacBook Pro 15" Retina A1398 Mid 2012 to Early 2013

Especificações

Especificações

Part #:
923-0096

Compatibilidade

Histórias de Reparos

Avatar do usuário

Meu Problema

My magsafe was burnt due to not unplugging the charger when 100%.

Minha Solução

Everything was easy to find thanks to great photos in the guide. Dropped the screws underneath the logic bosrd a couple of times but I carefully shaked them out and back at it.

Meu Conselho

As ZIF cables can be tricky to put back in place. (Especial . . .

Avatar do usuário

Meu Problema

The battery was not charging, the green led sometimes was on, sometimes off. With the new magsafe2 board the battery begins to charge, the led changes from green to orange. But there is one problem. When the computer is turned on, the led turns off and the computer remains working maintained only by . . .

Avatar do usuário

Meu Problema

MacBook Pro was no longer charging, there was charring. Something was wrong with my original MagSafe connector.

Minha Solução

It went great! The iFixit walkthrough was very helpful. I have done this sort of thing, so I was comfortable with it.

Meu Conselho

Print out the instructions, and then tape the screws to them with clear . . .

Avatar do usuário

Meu Problema

MacBook not charging

Minha Solução

The repair went pretty smoothly. The trickiest part was removing the keyboard ribbon cable. The instructions were not clear to show the actual location of the section that you have to flip up. With patience it wasn't too difficult to figure out. The project tray came in very . . .

Mostrar mais