Ir para o conteúdo principal
Inglês
Chinês
Passo 2
Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield. If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.
  • Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield.

  • If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

用 Y000 螺丝刀从显示屏 EMI 屏蔽板的一侧卸下三颗 1.1mm 螺丝

如果松开这些螺钉遇到困难,请在转动时将螺丝刀用力按压在螺钉上。如有必要,使用撬棒的扁平边缘从后面支撑每个夹扣,这样可以对螺丝施加更大的压力,而不会使夹扣弯曲。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.