Ir para o conteúdo principal
Inglês
Espanhol
Passo 2
Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield. If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.
  • Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield.

  • If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.