Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Inglês
Chinês
Passo 6
Before applying the adhesive, make sure your iPhone's battery connector lays flat so it doesn't press against the blue release liner. It's okay to temporarily reconnect the battery if needed—just be sure to disconnect it again before installing the display. Carefully align the exposed lower edge of the adhesive strip with the bottom edge of your iPhone's case. Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.
  • Before applying the adhesive, make sure your iPhone's battery connector lays flat so it doesn't press against the blue release liner. It's okay to temporarily reconnect the battery if needed—just be sure to disconnect it again before installing the display.

  • Carefully align the exposed lower edge of the adhesive strip with the bottom edge of your iPhone's case.

  • Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.

  • When it's correctly aligned, gently press the exposed lower adhesive strip into place.

在粘贴胶之前,请确保您的手机电池排线放平,避免阻挡蓝色防粘衬里。如果需要的话您可以暂时连接上电源排线——不过要确保安装屏幕的时候将其断开连接。

小心地将粘合胶揭开的部分对准手机的底部边缘。

一旦粘合胶贴到手机上,就不能再重新定位了——这时只能撕掉它重新贴一张新的。

对齐后,将揭开的部分轻轻按压到位。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.