Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Inglês
Alemão

Traduzindo o passo 10

Passo 10
When going back to the assembly and you don't know which speaker was on which side, you can see a small L and R on the logic board that'll help you! And that is pretty much it! You can also see how I attached the battery lol. Before screwing the main logic board back to the back I'd suggest taping the Battery to the base from all sides to ensure that it is actually stable now. And that is pretty much it! You can also see how I attached the battery lol. Before screwing the main logic board back to the back I'd suggest taping the Battery to the base from all sides to ensure that it is actually stable now.
  • When going back to the assembly and you don't know which speaker was on which side, you can see a small L and R on the logic board that'll help you!

  • And that is pretty much it! You can also see how I attached the battery lol. Before screwing the main logic board back to the back I'd suggest taping the Battery to the base from all sides to ensure that it is actually stable now.

Wenn du dein Gerät weider zusammenbaust und du nicht weißt, welcher Lautsprecher auf welcher Seite war, kannst du das auf dem Hauptboard nachschauen. Dort ist ein kleines L und R abgebildet, die die Seite bestimmen.

Und das war's auch schon! Man kann im Bild auch sehen, wie ich das Akku da festgeklebt habe lol. Bevor du das Hauptboard wieder zurückschraubst, empfehle ich, das Akku von allen Seiten festzukleben, um sicherzugehen, dass es tatsächlich stabil ist.

[* black] When going back to the assembly and you don't know which speaker was on which side, you can see a small L and R on the logic board that'll help you!
[* black] And that is pretty much it! You can also partially see how I attached the battery lol. Before screwing the main logic board back to the back I'd suggest taping the Battery to the base from '''all sides''' to ensure that it is actually stable now.
[* black] And that is pretty much it! You can also partially see how I attached the battery lol. Before screwing the main logic board back to the back I'd suggest taping the Battery to the base from '''all sides''' to ensure that it is actually stable now.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.