Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Inglês
Alemão
Passo 4
Now you have to remove this other front piece by prying it off with some kind of tool. I didn't have anything better and simply used some kind of hard plastic I found in my drawer. I suggest starting on the right side, since it's pretty much the only spot where you can start. NOTE: It's attached with adhesive so you'll have to use a bit of force to get it off the main body. And also this piece is attached by a couple of very thin cables to the logic board so don't tear them apart.
  • Now you have to remove this other front piece by prying it off with some kind of tool. I didn't have anything better and simply used some kind of hard plastic I found in my drawer. I suggest starting on the right side, since it's pretty much the only spot where you can start.

  • NOTE: It's attached with adhesive so you'll have to use a bit of force to get it off the main body. And also this piece is attached by a couple of very thin cables to the logic board so don't tear them apart.

Jetzt kannst du die Front abmachen. Ich hatte kein richtiges Werkzeug dafür also habe ich einfach hartes Plastikstück genommen, das ich in meiner Schublade gefunden habe. Ich empfehle auf der rechten Seite zu starten, da es somit die einzige Stelle ist, bei der du dein Werkzeug hinterhaken kannst.

ACHTUNG: Dieses Teil ist mit Klebstoff an der Basis befestigt also wirst du ein wenig mehr Kraft anwenden müssen. Auch ist es mit paar Kabeln mit dem Board verbunden also auch nicht zu viel Kraft anwenden!

[* black] Now you have to remove this other front piece by prying it off with some kind of tool. I didn't have anything better and simply used some kind of hard plastic I found in my drawer. I suggest starting on the right side, since it's pretty much the only spot where you can start.
[* black] Now you have to remove this other front piece by prying it off with some kind of tool. I didn't have anything better and simply used some kind of hard plastic I found in my drawer. I suggest starting on the right side, since it's pretty much the only spot where you can start.
[* black] '''NOTE:''' It's attached with adhesive so you'll have to use a bit of force to get it off the main body. And also this piece is attached by a couple of very thin cables to the logic board so don't tear them apart.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.