Ir para o conteúdo principal
Inglês
Francês

Remplacement du pavé tactile du MacBook Pro 13" avec touches de fonctions fin 2016

Guia de informações

= Concluído = Incompleto
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] '''To reassemble your device, follow the above steps in reverse order.''' [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Function%20Keys%20Late%202016|Answers[link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Function%20Keys%20Late%202016|Answers community] for troubleshooting help.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] '''To reassemble your device, follow the above steps in reverse order.''' [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Function%20Keys%20Late%202016|Answers[link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Function%20Keys%20Late%202016|Answers community] for troubleshooting help.

      Descreva a peça ou componente específico deste(a) device em que você está trabalhando. Ex: Bateria

      Criar um título.

      Este breve resumo só aparecerá em resultados de pesquisas.

      Dar informações básicas antes de o leitor mergulhar no guia.

      Passos do guia

      Passo 1

      Avec un tournevis Torx T5, dévissez les deux vis de 2,1 mm fixant le support du connecteur de la nappe du pavé tactile.

      Passo 2

      Ôtez le support du connecteur de la nappe du pavé tactile.

      Passo 3

      Avec votre spatule, déconnectez la nappe du pavé tactile en la soulevant délicatement tout droit hors de son connecteur sur la carte mère.

      Passo 4

      Préparez un iOpener et posez-le sur la nappe du pavé tactile pendant environ une minute, afin de ramollir l'adhésif qui la fixe sur la batterie.

      Passo 5

      Décollez soigneusement la nappe du pavé tactile de la batterie et mettez-la de l'autre côté de la batterie.

      Passo 6

      Avec un tournevis Torx T5, dévissez les dix vis fixant l'ensemble du pavé tactile :

      Passo 7

      Retirez l'ensemble du pavé tactile.

      Suas contribuições são licenciadas pela licença de código aberto Creative Commons.