Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Inglês
Chinês
Passo 4
Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

准备一个iOpener,把它放在触摸板排线上。

如果你没有iOpener,可以用一台吹风机来加热排线。排线应该是热的,但不能热到没法碰。

加热排线大约1分钟,让把触摸板排线固定在电池上的胶软下来。

[* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon cablecable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.
[* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable
Be careful not to overheat the battery.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon cablecable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.
[* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable
Be careful not to overheat the battery.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.