Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Inglês
Japonês
Passo 4
Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

温めたiOpenerをトラックパッドのリボンケーブルの上に約1分間載せて、バッテリー上部とトラックパッドリボンケーブルを固定している接着剤を温めて柔らかくします。

iOpenerを使用しない場合は、ヘアドライヤーを使ってケーブルを温めることができます。ケーブルは温かいものの、熱くて触れない程度にします。ぐれぐれも温めすぎないようにご注意ください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.