Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Inglês
Alemão
Passo 4
Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

Bereite einen iOpener vor und lege ihn etwa eine Minute lang auf das Flachbandkabel des Trackpads, um den Kleber zwischen dem Kabel und der Akkuoberseite aufzuweichen.

Wenn du keinen iOpener hast, benutze einen Fön zum Aufwärmen des Kabels. Das Kabel sollte warm sein, aber nicht so heiß, dass man es nicht mehr anfassen kann. Achte darauf, den Akku nicht zu überhitzen.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.