Ir para o conteúdo principal
Inglês
Holandês
Passo 18
Using the 10mm wrench, remove the hollow hex bolts and washers from the tuning pegs. Pull the tuning pegs out of the neck. For later reassembly, note how the two prongs on each peg match up with the holes in the bottom of the head. Pull the tuning pegs out of the neck. For later reassembly, note how the two prongs on each peg match up with the holes in the bottom of the head.
Disassembling the guitar head
  • Using the 10mm wrench, remove the hollow hex bolts and washers from the tuning pegs.

  • Pull the tuning pegs out of the neck. For later reassembly, note how the two prongs on each peg match up with the holes in the bottom of the head.

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.