Ir para o conteúdo principal
Inglês
Holandês
Passo 10
Flip the guitar upside down and locate the bridge/tremolo cavity. Using the Phillips 2 Screwdriver, loosen the two 1 5/8" anchoring screws to relieve some of the tension from the springs. Pull each spring off of its hook and remove from the bridge block.
Removing the bridge
  • Flip the guitar upside down and locate the bridge/tremolo cavity.

  • Using the Phillips 2 Screwdriver, loosen the two 1 5/8" anchoring screws to relieve some of the tension from the springs.

  • Pull each spring off of its hook and remove from the bridge block.

  • Take care not to damage the black wire soldered to the hook plate.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.