Ir para o conteúdo principal
Inglês
Holandês
Passo 9
Flip the guitar up-side-down and locate the electronics cavity. If the wires are zip-tied, use wire cutters to cut the tie. This will free up slack in the wires and make removal of later components easier. Take care to avoid cutting the wires when cutting the zip tie or when moving the wiring later.
Loosening the electronics
  • Flip the guitar up-side-down and locate the electronics cavity.

  • If the wires are zip-tied, use wire cutters to cut the tie. This will free up slack in the wires and make removal of later components easier.

  • Take care to avoid cutting the wires when cutting the zip tie or when moving the wiring later.

  • Pull the pots out into the wiring cavity. Remove the three washers on each knob and set aside.

  • Pull the selector switch into the wiring cavity.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.