Ir para o conteúdo principal
Inglês
Holandês
Passo 4
Locate the wiring back plate on the back of the guitar. This back plate is the one without any slots in it. Use the Phillips 2 Screwdriver to remove all four of the 1/2" back plate screws. Set aside. The back plate screws are very small. Use a dish or magnetic screw holder to keep track of them.
Removing the wiring backplate
  • Locate the wiring back plate on the back of the guitar. This back plate is the one without any slots in it.

  • Use the Phillips 2 Screwdriver to remove all four of the 1/2" back plate screws. Set aside.

  • The back plate screws are very small. Use a dish or magnetic screw holder to keep track of them.

  • Remove the back plate to reveal the wiring components beneath. Set the plate aside.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.