Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês
Passo 19
Carefully lift the logic board assembly from the left side and work it out of the upper case, minding the port side that may get caught during removal. Do not entirely remove the logic board yet!
  • Carefully lift the logic board assembly from the left side and work it out of the upper case, minding the port side that may get caught during removal.

  • Do not entirely remove the logic board yet!

  • Ensure that the logic board is free from all connections to the upper case (except the battery connector) before proceeding.

  • During reassembly, ensure all connectors and cables are not placed underneath the logic board. Some of the ribbon cables are very thin and fragile.

左側から基板アセンブリを持ち上げて、上部ケースから取り出します。側にある端子が絡まないようご注意ください。

まだ基板を完全に取り出さないでください!

次の手順に進む前に(バッテリコネクタ以外)、基板から上部ケースに接続された全てのコネクタを外しているか確認してください。

再組み立ての際には、全てのコネクタとケーブルが基板の下に残されていないか確認してください。あるリボンケーブルは大変薄く、壊れやすいものがあります。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.