Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Inglês
Japonês
Passo 2
Use a spudger  to gently pry the ambient light sensor out of its recess on the front panel. Try to get your tool all the way under the sensor to pry it away from the clear plastic beneath. If you pry only against the cable, the sensor may separate from the cable assembly and will need replacement. If you're replacing the sensor/cable assembly anyway, then it doesn't matter.
  • Use a spudger to gently pry the ambient light sensor out of its recess on the front panel.

  • Try to get your tool all the way under the sensor to pry it away from the clear plastic beneath. If you pry only against the cable, the sensor may separate from the cable assembly and will need replacement. If you're replacing the sensor/cable assembly anyway, then it doesn't matter.

スパッジャーを使って、正面パネルの角から環境光センサーを丁寧に引き出します。

透明なプラスチックの下からこじ開けるためセンサーの一番底にツールを差し込んでください。ケーブルに対してこじ開けるとケーブルアセンブリからケーブルを取り外せて交換が必要です。センサ/ケーブルアセンブリを交換する場合は、どちらでも構いません。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.